Westsail Owners Alliance - Post: "Portlights"
Westsail Westsail Owners Affiliation
 Important information about this site! 

Post: "Portlights"

12,268 posts on 2,444 threads   •   From Mar 07, 2004 - Jan 08, 2012

How

Text Strings  

Full Phrase  

Which

All Words  

Any Word  

Where

Message Text

Text & Author  

What
Message Author Message Content   (1 of 1)
- Archived Message from Inactive Forum -

Fred K. Cheney

I had the same problem (delamination on the portside cabin side under center portlight in the saloon on the mahogany where the two pieces meet) The mahog. was so rotten that I cut it out in an inverted "V" around the portlight. I just replaced the wood with a piece of oak veneer, spliced in... I will probably end up painting that part of the cabin wall. The portlights were not difficult for me to remove - I have already done the starboard side, removed all 3, cleaned and rebedded them I used 3M 101 I think, - I've heard that Boatlife is good too, I would not use 5200... I also epoxied all around the edges of the holes first for a good seal...I'll post some pics of this "little" project soon...

Showing record #1 of 1 matching record


Showing record #1 of 1 matching record

  Forum Archive Home    Back to Previous Page   Show Posts w/ Images   Windbag Newsletter 
This site is provided as service to Westsail Owners by Jack Webb on Westsail 32, Hull #438, at http://HighSeasDrifter.net,
This site is provided as service to Westsail Owners by  Jack Webb (s/v Drifter, Westsail 32, Hull #438)