Westsail Owners Alliance - Post: "Rudders ?"
Westsail Westsail Owners Affiliation
 Important information about this site! 

Post: "Rudders ?"

12,268 posts on 2,444 threads   •   From Mar 07, 2004 - Jan 08, 2012


Text Strings  

Full Phrase  


All Words  

Any Word  


Message Text

Text & Author  

Message Author Message Content   (1 of 1)
- Archived Message from Inactive Forum -

Jeff Matthiae


I'd be quite interested in a new rudder design.

I had planned to haul out this fall and rudder work was part of my agenda. Since they dropped the lake level about 5ft in the last 3 weeks I'm stuck in the water until it comes up a couple of feet. So unless the remnants of Fay brings us enough water (had a nice rain last night) for me to get out in the next two weeks, I'll be waiting until April to come out.

Items 1,2,6,8,9 are my biggest interest.

I agree with trying to minimize weight at the ends, but the weight of that stainless doesn't really seem to be all that significant. A cutout at the front could probably be made to raise the tiller higher, although I haven't had an issue with that. I'd really need to be convinced that whatever replaces the stainless would be as strong or stronger.

The trim tab sounds interesting. I'm guessing this would be more useful when hand steering or using an electric autopilot. I haven't installed my Monitor yet, kinda useless on the lake, so I don't have the experience to judge whether a trim tab would provide a benefit over adjusting the control lines. I guess it wouldn't hurt though.

Have people been having problems with the bronze pins? Bronze pins with bronze bolts, etc. and isolated from any other metals.... I don't get the need for the zincs.

I'd opt for epoxy.

In regards to your other post. As much as I'd like to visit Hawaii someday, I think at this stage I'd be more interested in having them made or in shipping the molds. Perhaps a group build could be done at a couple of places around the country.

I'm ok with your target price range. Much beyond that and I'll just stick to repairing/modifying my rudder which is water logged but not in bad shape yet, especially since I'll be sending off the deposit for a new mast and boom shortly (Ballenger Spars).

BTW, my boat is a 1975 hull #431.


Showing record #1 of 1 matching record

Showing record #1 of 1 matching record

  Forum Archive Home    Back to Previous Page   Show Posts w/ Images   Windbag Newsletter 
This site is provided as service to Westsail Owners by Jack Webb on Westsail 32, Hull #438, at http://HighSeasDrifter.net,
This site is provided as service to Westsail Owners by  Jack Webb (s/v Drifter, Westsail 32, Hull #438)