Westsail Owners Alliance - Post: "Sail Names"
Westsail Westsail Owners Affiliation
 Important information about this site! 

Post: "Sail Names"

12,268 posts on 2,444 threads   •   From Mar 07, 2004 - Jan 08, 2012


Text Strings  

Full Phrase  


All Words  

Any Word  


Message Text

Text & Author  

Message Author Message Content   (1 of 1)
- Archived Message from Inactive Forum -

Aaron Norlund


As I've come to understand them:

Yankee: any headsail with a high cut clew; aka, the tack is an acute angle, leaving the clew a good ways off the deck, usually for better visibility.

No. 1 Jib: Primary, working jib.
No. 2 Jib: smaller sail for higher wind.

A lapper is a jib that over"laps" the mast, but is still a full weight material (IE, 7 or 8 oz for our boats).

A genoa is a sail that generally overlaps the mast, but is made from a slightly lighter material for improved shape in light winds (IE, 5 or 6 oz dacron). They are usually fairly flat and ARE hanked on (or on a roller system).

A reacher is basically a genoa, but with a higher cut clew, but not to the extreme of a yankee. They are light (4 or 5 oz for us), and have a bit more of a belly to them and are usually hanked on.

A drifter is basically an asymetrical spinnaker. A free flown (or with a hank or two), nylon sail that can reach a bit, but is great from running off the wind and poling out. Great for when the other sails (above) would be left slatting in the force 1 breeze.

There is a lot of technical brewha that could be brought up, but that's basically it.

Fair leads from Lunenberg,
Aaron N.

Showing record #1 of 1 matching record

Showing record #1 of 1 matching record

  Forum Archive Home    Back to Previous Page   Show Posts w/ Images   Windbag Newsletter 
This site is provided as service to Westsail Owners by Jack Webb on Westsail 32, Hull #438, at http://HighSeasDrifter.net,
This site is provided as service to Westsail Owners by  Jack Webb (s/v Drifter, Westsail 32, Hull #438)